The Norcar Miniloader is a compact, powerful and highly agile machine designed for maintaining the varied landscapes surrounding transport infrastructure. Its small footprint and exceptional stability make it ideal for working safely on slopes, embankments and narrow access routes. With a wide range of specialist attachments, the Miniloader supports year‑round tasks including vegetation control, debris removal, surface clearing and winter maintenance, helping operators keep roads, rail corridors and public pathways safe, tidy and operational.



• Flail Mower - Cuts dense vegetation on slopes and verges.
• Hedge Cutter/Trimmer - Maintains hedges and embankment growth.
• Grapple Rake - Collects branches, scrub and debris.
• General Bucket - Moves soil, gravel and loose material.
• 4‑in‑1 Bucket - Grabs, levels, loads and dozes.
• High‑Tip Bucket - Loads material into higher-sided trucks.
• Pallet Forks - Moves palletised supplies and equipment.
• Auger - Drills holes for posts or signage.
• Brush Units (150–180 cm) — Sweeps paths, tracks and estate roads.
• Round Brushes (Plastic / Plastic+Steel) — Clears stubborn debris from hard surfaces.
• Push Broom (150–200 cm) — Quickly sweeps large open areas.
• Snow Blades (Various Sizes) — Clears snow from paths and access routes.
• V‑Plow — Cuts through deeper or compacted snow.
• Wing Bucket — Moves snow, soil or loose material efficiently.
• Sand Spreaders — Distributes grit for winter safety.
• Snow Blowers (Standard & HD) — Removes deep snow with directional discharge.
• High‑Pressure Washer — Cleans equipment, surfaces and estate infrastructure.
  

The Energreen Robo is a remote‑controlled, tracked tool‑carrier engineered for safe, efficient work on challenging terrain around transport infrastructure on slopes of up to 61 degrees. Its low centre of gravity, powerful hydraulics and exceptional stability allow it to operate confidently on steep slopes, embankments and restricted-access areas where conventional machinery cannot safely reach. By pairing the Robo with a wide range of specialist attachments, operators can manage vegetation, clear debris, maintain verges and perform year‑round upkeep along roadsides, rail corridors and public pathways — all while keeping workers at a safe distance from traffic and hazardous ground conditions.

• Head 130 – Mulching Head — Cuts and mulches grass, weeds and scrub. 
• Forestry 130H – Rotary Hammers — Shreds heavier vegetation and woody material. 
• Forestry 130T – Fixed Teeth — Mulches dense brush and small trees. 
• Stump Grinder — Removes stumps and grinds below ground level. 
• Rotary Mower — Fast, clean cutting of grass and vegetation. 
• Cutter Bar — Precise trimming of verges and tall vegetation. 
• Rake — Collects cut vegetation and debris. 
• Brush — Sweeps surfaces and clears loose material. 
• Forks — Lifts and transports materials or debris. 
• Bucket — Moves soil, aggregate or loose material. 
• Grapple Bucket — Grabs and carries branches or bulky waste. 
• Land Blade — Levels ground, verges or access routes. 
• Trencher — Cuts narrow trenches for drainage or cabling. 
• Rotary Tiller — Breaks up soil for ground preparation. 
• Rotary Harrow — Levels and refines soil or ballast edges. 
• Sprayer — Applies treatments along verges or embankments. 
• Forestry Winch — Pulls material or assists recovery on slopes. 
• Bio‑Shredder — Shreds organic waste into fine mulch. 
• Trimmy Arm - Extends reach for verge and embankment cutting.

With a choice of petrol, diesel or battery powered engines, the CastGroup WorkyQuad is a compact, highly manoeuvrable mini skidsteer designed to operate confidently in the demanding environments surrounding transport infrastructure. Its small footprint, strong hydraulic performance and exceptional stability make it ideal for maintaining slopes, verges, pathways and restricted‑access areas along roads and rail corridors. Paired with a versatile range of attachments, the WorkyQuad supports debris removal, surface clearing and winter maintenance, helping operators keep transport routes safe, tidy and operational throughout the year.

• 4‑in‑1 Bucket - Multi-purpose bucket combining several functions such as loading, leveling and grabbing.
• Arborist Log Grapple - Hydraulic grapple designed for handling logs, branches and timber.
• Auger - used for drilling holes in different soil types. Available with various drills suitable for hard, stony, sandy or clay soils.
• Carpet/Tile Remover - Used for removing floor coverings such as carpet, tiles and related materials during demolition or renovation
• Flail Mower - Hydraulically driven mower designed for cutting grass, brush and vegetation.
• Floating Rotary Broom - Sweeping attachment designed for cleaning surfaces such as roads, yards, and work sites.
• Grabbing Tool - Handles and moves various materials, including debris, branches and bulky items.
• Grapple Bucket - Combines scooping and gripping in a single attachment for faster site clearance.
• High Volume Bucket - Bucket designed for handling light materials such as leaves, sawdust and similar loose products
• Hydraulic or Mechanical Snow Plow - Attachment for clearing snow from surfaces.
• Jib Boom - Lifting attachment that converts the loader into a small crane, allowing safe handling and positioning of loads
• Low Profile Bucket - General-purpose bucket ideal for leveling and precision work.
• Sand Bucket - Bucket suitable for collecting and transporting sand, gravel and similar materials.
• Stone Burier - Used to bury stones and debris while leaving a fine soil surface, ideal for landscaping and seeding.
• Swinging Excavator Arm - Excavator-style arm attachment that enables digging and trenching with lateral movement
• Trailer Coupling - Attachment used for moving trailers, carts and trolleys.
• Trencher- Attachment designed for digging narrow trenches for utilities such as pipes, cables or drainage systems